Render Angle Bead (mesh)
Angle Bead (45mm wing, 13mm plaster depth)
- Helps for a true, straight arris
- Designed to prevent chipping and cracking to vulnerable corners.
- Use with two coat plaster application.
Installation usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.
Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.
If you require further information on our Render Angle Bead (mesh) give sales a call on 01942 720777 or email us on firstname.lastname@example.org.
There are no reviews yet.