The quick and easy solution to filling joints between paving slabs and setts, suitable for natural stone and concrete paving (not suitable for use with porcelain products). So simple to use, Projoint Fusion allows an untrained hand to consistently deliver perfect joints every time - whatever the weather!

It delivers a weed free, frost resistant joint, without staining the paving - saving you time and money.

• Contractor-sized 15kg tubs
• Suitable for use in wet weather
• Professional strength
• Premixed, ready to use
• Cement free
• Suitable for pedestrian traffic, ideal for paths and patios
• Perfect for DIY use

Preparation:

Ensure the surface of the paving is clean prior to application. Check the joints are cleaned out to a depth of 25mm observing a minimum joint width of 3mm, and that the paving is firmly bedded and stable prior to filling joints. Paving should be laid on a permeable bedding mix as Fusion cures when it dries out so water/rain must have a route of escape.

Application:

Apply Fusion when surface temperature is between 0 degrees and 25 degrees. Liberally soak the paving first and then empty the mix evenly onto the surface and work quickly into the joints using a brush or squeegee.

Mist the surface and compound with a soft spray of water to flush the material down into the joints. Top up any low joints and repeat as necessary.

Once the water has drained away then sweep the paving with a fresh soft brush at 45 degree to the joints, and remove any excess. A trowel or iron can be used to achieve a traditional finish if required.

The product can be used in light rain but prolonged and heavy rain will delay the curing process and increase the risk of fluid damage.

Coverage: