H4 Hurricane Tie
Designed to provide ties for trusses and rafters likely to be subject to high winds, this versatile range may be used for general purposes,
strongback attachments and as all-purpose ties where one timber crosses another.
H2.5A and H4 may be installed in pairs to achieve twice the stated safe working loads. Where the truss thickness is less than 63mm install diagonally across from each other, as shown in the illustration below.
The H4 has a unique shape that requires fewer nails. The design allows for installation on the inside of the wall plate without interfering with the gypsum board or for installation on the outside of the wall plate without interfering with the cladding material.
Ties are shipped in equal quantities of right and left handed variants.
Protruding nails should always be cinched.
Our H4 Hurricane Tie is available in a 150mm size only.
There are no reviews yet.